A flickering light and a full rewire start the same way, with a clear conversation about what the job involves and what it will cost. Odessa Electrical Company handles electrical work for homes and businesses across Odessa and Ector County, from a single tripped breaker to a complete service upgrade. We are available every day from 8 AM to 8 PM, and when you call, you get straight answers about your panel and wiring before anything is scheduled.
Safe wiring. Solid workmanship. Straight answers.
This area has every kind of panel and circuit in it, from older homes with original wiring to newer builds with modern load demands, and the work we handle reflects that range. Homeowners, landlords, property managers, and business owners all call us for different reasons, but the process is the same: figure out what the job involves, confirm the price, and get it done right.
We handle the everyday electrical work that keeps a property running: repairs and troubleshooting for flickering lights, dead outlets, and tripping breakers, outlet and switch installation, indoor and outdoor lighting, ceiling fans, and wiring for new circuits or additions. On the commercial side, that extends to dedicated circuits for equipment, panel capacity checks, and lighting upgrades across larger spaces.
Every job, whether it is a single outlet or a full rewiring project, gets the same approach. We scope it on the call, tell you what it covers, and schedule the visit once you know what to expect. We are a local electrician for homeowners and commercial clients alike, and the work is carried out to the code inspectors in Ector County enforce. We'll take care of the circuits from here.
Flickering lights are rarely just a bulb problem. They usually point to a loose connection somewhere in the circuit, an overloaded branch, or a breaker that is beginning to fail. A diagnostic visit starts at the panel and works outward, checking for the source rather than treating the symptom. Where the wiring or breaker is the cause, we replace what needs replacing and test the circuit before we leave.
Tripping breakers follow a similar pattern. A breaker that trips once under a heavy load is doing its job. One that trips repeatedly on a normal load is telling you something about the circuit, the panel, or the device drawing from it. We check for arc-fault and ground-fault conditions as part of that process, and where AFCI or GFCI protection is missing or outdated, we can bring it up to current standards at the same visit.
A dead outlet is one of the more common calls we get, and the cause is usually one of three things: a tripped GFCI outlet upstream, a failed breaker, or a wiring fault further back in the circuit. We trace it from the panel outward, confirm the cause, and fix it at the source.
If the GFCI outlet itself has failed, we replace it. If the breaker is the problem, we swap it out and check the rest of the panel while we are there. Where the fault is in the wiring, we open the circuit, locate the break, and repair it properly. Dead outlets usually have a simple cause worth finding.
Electrical problems don't wait, and neither do we, especially when the panel is the root cause. Older homes in Odessa often came with 100-amp service, which was adequate for the electrical loads of the time. Central air conditioning, electric dryers, EV chargers, and the general increase in always-on devices have pushed many of those panels past their practical limits.
A service upgrade to 200 amps gives a home the capacity it needs for modern loads without the nuisance tripping and voltage fluctuations that come from running a panel at its edge. For larger homes or properties with outbuildings, a subpanel can extend capacity to a garage, workshop, or addition without running new service from the street.
The process starts with a load calculation: we add up what the panel is already carrying, account for what is being added, and confirm what the service entrance can support. From there, we scope the upgrade, confirm the price, and schedule the work. We handle electrical service scheduled without the runaround, from the first call through to the final inspection.
Wiring is easier to deal with when somebody explains it plainly, and the first thing to understand is that not all old wiring is the same problem. Knob-and-tube wiring from the early part of last century is a different concern from aluminum branch-circuit wiring installed in the 1960s and 1970s. Both can be addressed, but the approach differs.
Aluminum wiring remediation typically involves installing approved connectors at every device and outlet, or replacing the branch circuits entirely where the wiring condition warrants it. Knob-and-tube replacement is a more involved project, usually done in stages alongside a renovation or when an insurance carrier flags it.
Electrical safety inspections are a practical starting point for any property where the wiring history is unclear. We check the panel, the grounding and bonding, the condition of visible wiring, and the presence of GFCI and AFCI protection where it is required. These inspections are commonly requested before a home sale, after a purchase, or when a renovation is planned. We cover what we find, explain what it means, and tell you what the options are. We're ready to get your circuits working again.
Most of the calls we get are not emergencies. They are upgrades and additions that make a home or business more functional: recessed lighting in a kitchen that has never had enough of it, an outdoor outlet on a patio that currently has none, a ceiling fan in a room that only has a light fixture, or a dedicated circuit for a new appliance that keeps tripping the shared breaker it is on.
We handle all of it:
In West Texas, outdoor circuits take a particular kind of wear. Heat, UV exposure, and the occasional summer storm push weatherproof outlet and outdoor lighting installations harder than they would in a milder climate. We use materials and methods rated for that environment.
The electrical side of EV charging is straightforward once the panel capacity is confirmed. A Level 2 charger needs a dedicated 240-volt circuit sized to the charger's draw. We check whether the existing panel can carry the added load, run the circuit to wherever the charger will be mounted, and install the outlet or hardwire the unit as the manufacturer specifies. If the panel needs capacity added first, we handle that as part of the same project.
Generator hookups work from the same starting point. The electrical work involves installing a transfer switch at the panel, running the connection to where the generator will sit, and confirming that the switch isolates the home circuits from the utility line before the generator feeds them. We handle the panel and transfer switch side of that installation.
Whole-home surge protection installs at the panel and catches voltage spikes before they reach the wiring and devices downstream. Summer storms across the Permian region can push significant surges through the utility line, and a panel-level suppressor is the most effective point to stop them. You're talking to someone who knows the area and the homes in it, and surge protection is one of the more practical investments for a property here. We offer no-pressure estimates, priced up front, so you know what the job costs before we schedule anything.
We serve Odessa as our primary base and take work across Ector County and the surrounding communities. If you are outside Odessa proper, call and ask about your address. We cover a wide area and handle requests from:
Whether the job is a single outlet in a home or a panel upgrade at a commercial property, the same process applies: call, get the scope and price confirmed, and schedule the visit.
Reach us at (432) 326-6289.
Wiring is easier to deal with when somebody explains it plainly, and that starts with the price. When you call, we ask about the job, scope what it involves, and give you a price before anything is booked. You know what the work covers and what it costs before anyone shows up at your door.
Here is how a typical job goes:
We are open every day from 8 AM to 8 PM. For urgent electrical faults, calls are answered within those hours and we take short-notice work where the schedule allows. Availability on short notice depends on what is already booked, but a quick call will tell you what the schedule has open.
Plain answers. Clear options. Safe wiring.
We're ready to get your circuits working again.
We work with homeowners, landlords, property managers, and commercial clients across Odessa and Ector County. Whether the job is a single outlet in a rental unit or a panel upgrade at a commercial property, the process starts the same way: a call, a clear scope, and a price before anything is scheduled.
Older properties in this area turn up a range of conditions, including aluminum branch-circuit wiring, undersized panels, and in some cases knob-and-tube systems that were never replaced. We know what to look for in Odessa's older housing stock and explain what we find before recommending any work.
Knowing which neighborhoods have older wiring, which housing types commonly have undersized panels, and how the West Texas climate affects exterior wiring and surge exposure all shape how we approach a job. That context helps us scope the work accurately on the call rather than discovering surprises on site.
If something is not right after we complete a job, call (432) 326-6289 and describe what you are seeing.
We take those calls seriously and come back to look at the work. The goal is that the job is done correctly before we leave, and a callback is how we make sure of it.
The process is the same regardless of size: call, scope the job, confirm the price, schedule the visit. A small job like an outlet replacement might be scoped and priced in a short call. A larger project like a panel upgrade or a rewire involves more questions, a load calculation, and sometimes a site visit to confirm the scope before the price is finalized.
A clear scope agreed on before work begins is the biggest factor. When we know exactly what the job involves, what access is needed, and what the customer expects, the visit goes as planned. That is why we spend time on the call getting the details right before anything is scheduled.
Odessa Electrical Company handles electrical work for homes and businesses across Odessa, Ector County, and the surrounding area. Repairs, panel upgrades, rewiring, lighting, EV charger circuits, generator hookups, surge protection: if it runs on electricity, call us and we will tell you what the job involves and what it costs.
We are available every day from 8 AM to 8 PM.
Call (432) 326-6289 to get a quote or schedule a visit.
(432) 326-6289