When you need an electrician in Odessa, TX, you want someone who shows up fast, does the work right, and gives you a straight answer on what it costs. Gus Bus Electrical and Controls handles everything from a single dead outlet to a full commercial wiring project, and we keep same-day appointments available for urgent calls. Work is performed by licensed electricians who know West Texas homes and businesses. Whether you need a quick repair, a panel upgrade, or a brand-new circuit, we are ready to get it done. Family-owned. Locally rooted. Ready to wire.
Dealing with a tripping breaker or a dead outlet? Those problems are frustrating, and they are not always easy to diagnose on your own. We run a thorough check from the panel to the fixture, track down the fault, and tell you exactly what we found. You get straight answers about your panel and wiring, no surprises.
We test for arc-fault and ground-fault conditions, inspect GFCI and AFCI protection throughout the home or building, and trace wiring problems that other shops miss. Whether it is a single circuit acting up or an intermittent fault that has stumped you for months, we have the tools and the experience to find it.
Dead outlets, loose switches, and non-responsive dimmers are some of the most common calls we get. We handle outlet repair and replacement, GFCI outlet installation in kitchens, bathrooms, and garages, USB outlet installation, dimmer switch installation, and light switch replacement. All work is code-compliant, and we do not cut corners on the connections behind the wall.
A breaker that keeps tripping is telling you something. It could be a worn breaker, an overloaded circuit, or a deeper wiring issue. We diagnose and replace faulty circuit breakers, install dedicated circuits for dryers, ranges, refrigerators, and other high-draw appliances, and make sure the panel is protected properly before we leave. We'll have your outlets working again in no time.
Flickering lights are annoying at best and a wiring warning at worst. We repair flickering fixtures, install and replace light fixtures throughout the home, wire recessed and LED lighting, and handle ceiling fan installation and wiring from start to finish. We also wire bathroom exhaust fans where proper ventilation matters for moisture control.
Most homeowners do not think about their electrical panel until it causes a problem. An aging panel, a breaker that will not reset, or a home that keeps blowing fuses are all signs that the panel may need attention. We perform electrical panel upgrades, 200-amp service upgrades, and subpanel installation for homes and businesses that need more capacity.
Before any upgrade, we run a load calculation to make sure the new panel can handle everything on the property, including new circuits you plan to add. We also handle service-entrance and meter upgrades when the utility connection itself needs to be brought up to current standards. We stand behind every circuit we touch, and that starts at the panel.
Let us handle the panel and the permits.
A properly wired home is a safer home, and older properties in West Texas often have wiring that has not been touched in decades. We handle whole-home rewiring, knob-and-tube wiring replacement, and aluminum wiring remediation for homes where the original materials have aged past their safe service life. Grounding and bonding are part of every job, and all work meets current code.
We wire new construction from the ground up and handle remodel wiring for kitchens, bathrooms, and room additions. If you are finishing a garage, wiring a workshop, or adding power to a shed or outbuilding, we can run the circuit and get it permitted. We keep your home powered and safe.
We wire homes and businesses every day, and we are good at it, and that includes everything that runs outside the four walls. Outdoor outlet installation, weatherproof outlets, security lighting, motion sensor lights, and landscape lighting are all part of what we do. For homeowners with pools or hot tubs, we handle pool electrical wiring and hot tub hookups to code, including the bonding and grounding requirements that protect swimmers.
We also install whole-home surge protection to guard appliances and electronics against voltage spikes, which are a real concern in areas with unstable summer grid loads. Smoke detector and carbon monoxide detector installation rounds out our safety work. We keep you informed from diagnosis to final test so you know the system is right before we pack up. We'll make your wiring safe again.
West Texas puts real demands on electrical systems. Summers here are long and hot, air conditioning runs nearly nonstop for months, and the grid load that creates pushes older panels and wiring to their limits. At the same time, the Permian Basin is seeing strong growth in solar adoption and EV ownership. These are the jobs that come up most often for Odessa homeowners right now.
Odessa's intense summer cooling loads are hard on older panels. Homes in established neighborhoods were often wired for a fraction of the load a modern household puts on a panel, and new construction in fast-growing areas around the region is adding circuits that require adequate capacity from day one. We size and install 200-amp panel upgrades, add subpanels where needed, and run load calculations so the system is built for what you actually use, not what was typical thirty years ago.
West Texas sun exposure gives Odessa some of the strongest solar production numbers in the state. If you are moving toward solar, we handle the electrical side: service-entrance capacity review, dedicated circuit installation, interconnection wiring, and battery backup hookups. We work alongside your solar installer to make sure the power side of the system is wired correctly and inspected before it goes live.
EV ownership is growing across the Permian Basin, and a Level 2 home charger makes daily driving practical. We install the dedicated circuit, check panel capacity to confirm it can carry the added load, and mount the charger in the right location for your garage or driveway. If the panel needs an upgrade first, we handle that too, so the whole job gets done in one call.
Electrical faults do not wait for business hours. A dead panel, a burning smell from an outlet, or a circuit that goes out in the middle of the night is a call we take seriously. We keep same-day appointments available and respond to after-hours calls when the situation is urgent.
When you call us, you are talking to someone who knows the area and the homes in it. We can tell you over the phone whether something needs immediate attention or can wait for a scheduled visit, and we will give you an honest answer either way. Local crew. Real electrician on the phone. Quick to respond.
Most homeowners in Odessa need an electrician a handful of times over the life of a house. We handle repairs, remodels, panel upgrades, and new circuits for single-family homes, and we work on older homes where the wiring needs to be brought up to code before a sale or renovation.
On the commercial side, we wire offices, retail spaces, and rental properties. Landlords and property managers call us for outlet repairs, lighting upgrades, panel work, and code compliance before a tenant moves in. We also handle new construction wiring and renovation projects for businesses that need a reliable electrical contractor who can work around a schedule. Whatever the property type, we bring the same attention to detail.
If you are buying a home, selling one, or just want to know the condition of the wiring in a building you own, an electrical safety inspection gives you a clear picture. We check the panel, the wiring, the grounding and bonding, and the condition of GFCI and AFCI protection throughout the property.
Most homeowners can't tell a minor wiring issue from a serious one, and an inspection takes the guesswork out of it. We document what we find, explain it in plain language, and let you decide how to move forward. Smoke detector and carbon monoxide detector installation is easy to add to any inspection visit if you want to cover safety in one trip.
If you've never hired an electrician before, the pricing question is usually the first one. We give you a clear estimate before any work starts. A service call covers the diagnosis and a full explanation of what the job requires. From there, you decide whether to move forward.
There are no hidden add-ons after the fact. We tell you what the job costs, we do the work, and we make sure it passes inspection. Scheduling is straightforward: call us, describe what you are dealing with, and we will find a time that works. We trace the fault. We fix the wiring. We restore the power.
Yes. When a job requires a permit, we pull it. When an inspection is required, we schedule it. That process protects you as the property owner and ensures the work meets current code. We handle the permit side so you do not have to track it down yourself.
A panel upgrade starts with a load calculation to determine what your home or business actually needs. We then install the new panel, replace the service entrance if needed, and run any new circuits the upgrade requires. West Texas summers put a heavy cooling load on older panels, so we size the new panel to handle that demand along with any circuits you plan to add.
A whole-home surge protector installs at the panel and intercepts voltage spikes before they reach your appliances and electronics. Grid fluctuations and summer storms can send damaging surges through the system in an instant. Adding surge protection at the panel is a straightforward step that protects everything connected to your home's wiring.
A Level 2 home charger requires a dedicated 240-volt circuit, which most homes are not already wired for. We start every EV charger installation with a panel check to confirm the service can support the added load. If a panel upgrade is needed first, we handle that as part of the same project so the job gets done in one call.
We handle the electrical infrastructure side of solar projects: reviewing service-entrance capacity, installing dedicated circuits, wiring the interconnection, and connecting battery backup systems. We work alongside your solar installer to make sure the power side is wired correctly and ready for inspection before the system goes live. We do not install the solar panels or inverters themselves.
A quick repair addresses a specific fault, such as a bad outlet, a worn breaker, or a failed fixture. A rewire replaces the wiring throughout part or all of a home, which is typically needed when the existing conductors have aged past their safe service life or when aluminum or knob-and-tube wiring needs to be replaced. We assess the condition of your wiring and recommend the appropriate scope of work.
Common signs include breakers that trip frequently, a panel that feels warm to the touch, a burning smell near the box, lights that dim when a large appliance starts, or a panel that still uses fuses instead of breakers. Any of these symptoms deserve a professional look before they develop into a more serious problem.
Aluminum wiring itself is not automatically dangerous, but it requires specific handling and compatible devices to remain safe. Connections that were not made with aluminum-rated materials can loosen over time and create a fire risk. We identify aluminum wiring during inspections and remediate it properly using approved methods and materials.
GFCI protection is required in kitchens, bathrooms, garages, outdoor locations, and anywhere an outlet is near a water source. AFCI protection is required on most bedroom circuits in newer construction and is increasingly required in other living areas under current code. We install both types where code requires them and where older wiring leaves a home short of current safety standards.
Yes. We can add GFCI protection to ungrounded circuits, which is a code-accepted method for updating two-prong outlets without running new wiring throughout the home. Where a full ground is needed, we assess the best approach for your specific wiring situation and explain the options clearly before starting.
Yes. Ranges, dryers, refrigerators, and other high-draw appliances need their own protected circuit. We also run dedicated circuits for workshops, garages, and outbuildings where tools and equipment require reliable, properly sized power. We size the circuit correctly for the load and make sure the panel has the capacity to support it.
We test every circuit, outlet, and fixture we work on before we pack up. That includes checking for proper voltage, verifying GFCI and AFCI function where applicable, and confirming that the panel is operating correctly after any upgrade or repair. We do not consider a job finished until the work has been verified.
An inspection makes sense before buying or selling a home, before a major renovation, when a property has not had a professional electrical review in several years, or when a landlord wants to confirm the wiring is safe before a new tenant moves in. We check the panel, circuits, outlets, grounding, and safety protection and explain what we find in plain language.
Gus Bus Electrical and Controls serves Odessa, Midland County, and the surrounding communities including Midland, Andrews, Monahans, Pecos, and Kermit. Whether you need a same-day repair or a planned upgrade, we are ready to take your call and get the work on the schedule.
Call (432) 326-6289 to request a quote or book a service call. We will answer, give you a straight answer, and get an electrician to your door. Family-owned. Locally rooted. Ready to wire.
Every home and business has its own electrical story, and we have seen just about all of them across Odessa and the surrounding area. The table below lays out the core services we offer, what each one covers, and a practical note to help you figure out where to start. If you have questions about your specific situation, a quick call is the fastest way to get a straight answer.
| Service | What the Job Involves | Best For | Things to Know |
|---|---|---|---|
| EV Charger Installation |
| EV owners who want faster, safer home charging | Most homes are not wired for a Level 2 charger out of the box. We start every job with a panel check so there are no surprises once the charger is in. |
| Lighting Installation |
| homeowners upgrading interior or exterior lighting | Exterior lighting in West Texas takes a beating from heat and UV exposure. Weatherproof fixtures and proper circuit protection extend the life of the installation. |
| Pool and Spa Wiring |
| homeowners installing or servicing a pool, spa, or hot tub | Pool and spa wiring requires specific bonding and grounding to meet safety code. This is not a job to skip steps on. |
| Electrical Safety Inspections |
| home buyers, sellers, landlords, and owners of older properties | An inspection gives you a clear picture of a property's wiring before a transaction closes or a tenant moves in. We walk you through every finding. |
| Outlet and Switch Installation |
| homeowners adding convenience, safety, or code-required protection | GFCI protection is required by code in kitchens, bathrooms, garages, and outdoor locations. Older homes often lack it in all the right places. |
| Ceiling Fan Installation |
| any room where a ceiling fan is being added or replaced | A standard light box is not rated to support a ceiling fan. We confirm the box and wiring are correct before the fan goes up. |
| Electrical Panel and Service Upgrades |
| homes with an undersized panel, frequent trips, or a major new load being added | Sustained cooling loads from a Texas summer can push an older panel to its limit. A service upgrade is often the right move before adding an EV charger, solar system, or new AC circuit. |
| RV Hookups |
| homeowners who want a proper RV connection at their property | A dedicated 30-amp or 50-amp circuit keeps your RV running without overloading a standard household outlet. We handle the circuit and the panel side together. |
| Breaker and Fuse Repair |
| homes with breakers that trip often or a fuse box that needs attention | A breaker that trips repeatedly is telling you something. Resetting it without diagnosing the cause can leave an underlying wiring issue unaddressed. |
| Dedicated Appliance Circuits |
| homeowners adding high-draw appliances or outbuilding power | High-draw appliances need their own protected circuit. Sharing a circuit with other loads is a common cause of repeated tripping and can shorten appliance life. |
| Electrical Repairs and Troubleshooting |
| any home or business with an unexplained electrical problem | A proper diagnosis before any repair prevents the same problem from coming back. We check the full circuit, not just the symptom. |
| Solar and Battery Installation |
| homeowners putting West Texas sun exposure to work | We handle the electrical infrastructure side: wiring, circuits, and panel capacity. Proper panel sizing and code-compliant wiring are what make a solar tie-in safe and functional. |
| Whole-Home Surge Protection |
| any homeowner wanting to protect appliances and sensitive electronics | Voltage spikes from summer storms and grid fluctuations are a real risk in West Texas. A whole-home device protects everything on the panel, not just what is plugged into a strip. |
| Wiring and Circuit Installation |
| older homes needing updated wiring or any property adding new space | Older Odessa homes sometimes carry aluminum wiring that needs remediation before it is safe for long-term use. We handle full assessments and upgrades. |
| Outdoor and Misting-System Circuits |
| homeowners extending power to patios, yards, or outdoor cooling setups | Outdoor circuits in this climate need weatherproof covers and GFCI protection. We size the circuit to match the load so a misting system or landscape setup runs reliably. |
How do I know if my home needs a panel or service upgrade?
A few signs point clearly in that direction: breakers that trip often under normal use, a panel that still uses fuses instead of breakers, lights that dim when a large appliance kicks on, or a home where you want to add an EV charger, solar system, or central air unit and the existing service cannot carry the added load. We do a load calculation to confirm what the panel can handle before recommending an upgrade.
What causes a breaker to trip repeatedly?
The most common causes are an overloaded circuit, a faulty breaker, or a wiring problem on that circuit. A kitchen breaker that trips when multiple appliances run at once is usually an overload. A breaker that trips even under light use may have a wiring issue or a failing breaker. We diagnose the cause before recommending a fix so the problem does not come back.
Is electrical work permitted and inspected?
Most significant electrical work, including panel upgrades, new circuit installations, and service changes, requires a permit and a code inspection in Texas. We handle the permit process on jobs that require it and make sure the work is done to code so it passes inspection without issues.
Same-Day and Weekend Availability
We work hard to accommodate same-day and weekend requests when the schedule allows. When you call, we give you an honest answer about timing rather than a vague window.
Is the wiring safe in an older Odessa home?
It depends on the age of the home and what has been done to it over the years. Older homes in this area sometimes carry aluminum wiring or cloth-insulated conductors that have aged past their safe service life. An electrical safety inspection gives you a clear picture of what is there and what, if anything, needs attention. We walk you through every finding rather than handing you a list and leaving.
What does an EV charger installation involve?
A Level 2 home charger runs on a dedicated 240-volt circuit, which most homes do not already have in the garage. We start with a panel check to confirm the service can support the added load. If a panel upgrade is needed first, we handle that as part of the project. Once the circuit is in place, we install the charger outlet or hardwired unit and test the full setup before we leave.
Do I need to be home while the work is being done?
For most jobs, yes. We need access to the panel, the areas where we are working, and sometimes the attic or crawl space. We also walk you through what we found and what we did before we close out the job, so being present at the start and end of the visit is helpful. If your situation requires a different arrangement, we can talk through it when you call.
Work Performed by Licensed Electricians
Every job we take on is handled by licensed electricians who know the code and the work. We keep you informed from diagnosis to final test so there are no surprises.
How do estimates and pricing work?
When you call, we ask enough questions to give you a realistic sense of what the job involves and what it is likely to cost. For straightforward work, we can often give a clear range over the phone. For more complex jobs, a site visit to look at the panel or wiring gives us what we need for a firm number. We give you a clear estimate before any work begins, and we explain any variables that could affect the final cost.
What do flickering or dimming lights usually mean?
Occasional flicker when a large appliance starts up is usually a load issue on the circuit. Lights that flicker throughout the house, or that dim and brighten on their own, can point to a loose connection, a failing breaker, or a wiring problem that deserves a closer look. Persistent flickering is worth a call rather than something to wait on.
Straightforward Scheduling
We ask the right questions when you call so we show up prepared and ready to work. You will not be left guessing about when someone is coming or what the job is going to cost.
Are warm or buzzing outlets a problem?
Yes. An outlet that feels warm to the touch or makes a buzzing sound is a sign of a loose connection, an overloaded circuit, or a failing outlet. These are not things to ignore. Turn off the circuit at the breaker and call us. We will diagnose the cause and fix it properly.
How does surge protection help, and is it worth it?
A whole-home surge protector installs at the panel and guards every circuit in the house against voltage spikes from storms, grid fluctuations, and equipment switching on and off. In West Texas, summer storms and grid events are a genuine risk. A panel-level device protects appliances, electronics, and HVAC equipment all at once, which makes it a practical investment for most homes.
How long does a panel upgrade typically take?
A straightforward 200-amp service upgrade usually takes most of a day. Jobs that involve a service entrance replacement, a new meter base, or coordination with the utility for a power disconnect may take longer depending on scheduling. We give you a realistic time estimate before we start and keep you informed if anything changes during the job.
Call (432) 326-6289 and tell us what you are dealing with. We will give you straight answers and a clear path forward.
(432) 326-6289